Mix-Molder: How it works

STEP 1

Pour resin pellets and a desired additive, filler or colorant into the removable melt chamber of the Model-M mixing device.

STEP 2

Melt the materials in the chamber, and then mix them with the hand tool, or alternatively with an overhead mixer positioned over the Model-M mixing device.

STEP 3

Remove the melt chamber from the Model-M mixing device.

STEP 4

Insert the melt chamber into the Model-S Injection Molder.

STEP 5

Inject the mixed material into a desired mold by pulling down the handle of the model-S machine.

STEP 6

Remove the mold from the Model-S machine, and then remove the injection molded part from the mold.